Vidikron Vision 75 - Manual (Page 26)

Controls and Functions
10 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
1. LIGHT
Press to illuminate the buttons.
2. ON / OFF
Use these buttons to turn the projector on or off.
3. Source Selection Buttons:
VID
Press to select Composite video input as the source.
S-VID (S-Video)
Press to select the S-Video input as the source.
COMP1
Press to select Component 1 video input as the source.
COMP2
Press to select Component 2 video input as the source.
RGB
Press to select the Component 2 RGB input.
HDMI / HDMI 2
Press to select an HDMI input.
4. INFO
Displays active source, signal resolution, aspect ratio and other projector status
information.
Cursor Keys (
, , , )
Use these buttons to select items or settings, adjust settings or switch display patterns.
VAC (V2 Aperture Control)
Adjusts the lens aperture (iris) setting according to the ambient light level in the viewing
area.
EXIT
Press to save menu item setting(s), exit the current menu and return to the previous one.
ENTER
Press to select a highlighted menu item or confirm a changed setting.
MENU
Press this button to show or hide the on-screen display (OSD) controls.