Vidikron Vision 75 User Manual
Page 47
Vidikron Vision Model 65/Model 75 Installation/Operation Manual
31
Connecting 12-Volt Trigger
Output to External Theater
Equipment
If you are installing a Vision 65/75/CineWide with AutoScope, use the cable supplied with the
AutoScope Lens Motor to connect the motor to the 12-volt trigger output as shown in Figure
3-15.
Figure 3-15. Connecting the 12-Volt Trigger Output to the AutoScope Lens Motor
If your home theater contains a retractable screen, screen mask or other 12-volt
trigger-activated equipment, connect it to the 12-volt trigger output as shown in Figure 3-16.
Figure 3-16. Connecting the 12-Volt Trigger Output to Other Equipment
AutoScope
Lens Motor (Rear)
S-VID /
S-VID
AC Input
Power
Switch
3.5-mm
mini plug
S-VID /
S-VID
to other,
12-volt
trigger-activated equipment
(screen, screen mask etc.)
Red = +12V (Tip)
Black = Ground (Sleeve)
3.5-mm
mini plug