Vidikron Vision 75 - Manual (Page 59)

Vidikron Vision Model 65/Model 75 Installation/Operation Manual 43
4.1
Selecting Video Memory • Press the CUST1 or CUST2 button on the remote
control to recall settings for the current input
from the “Custom 1” or “Custom 2” memory
preset.
• Press ISF NIGHT to recall settings for the current input from the “ISF Night” memory
preset.
• Press ISF DAY to recall settings for the current input from the “ISF Day” memory preset.
4.2
Selecting an Aspect Ratio Use these buttons to select the appropriate aspect
ratio for the type of program material being viewed.
For more information on aspect ratios, refer to Table
4-1.
4.3
Adjusting the Picture • Press the BRT button on the remote control to
adjust the image brightness.
• Press CONT to adjust the image contrast.
• Press COL to adjust the image color level.
• Press TINT to adjust the hue of the image.
For more information about these controls, refer to Picture Adjust on page 46.
4.4
Selecting An Input Source When you turn on the Vision 65/75, it switches to
the last selected input and looks for a valid signal.
Use these buttons on the remote control to select
an input source directly.
4
Operation
CUST1 CUST2
ISF
DAY
ISF
NIGHT
16 : 9 IWIDE LBOX 4 : 3
CINEMA IWIDE
2.35
2 1
BRT CONT COL TINT
VID S-VID COMP1
HDMI RGB
INFO RVR
HDMI 2
COMP2