Install ceiling mount adapters/projector stands – Vidikron Vision 75 User Manual
Page 37
Vidikron Vision Model 65/Model 75 Installation/Operation Manual
21
Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, these brackets
bring the mounting points for the projector mounting plate (included with the projector
ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor
housing. For floor installations (where the projector is upright), the adapters allow the
projector to lie flat on the mounting surface.
Using the four (4), supplied M6 x 12mm Flat-Head Phillips screws (item #6), attach the
AutoScope Ceiling Mount Adapters/Projector Stands (items #4 and #5) to the projector as
shown in Figure 3-6.
Figure 3-6. Vision 65/75 with Ceiling Mount Adapters/Projector Stands
DO NOT OVER-TIGHTEN THE SCREWS.
Caution