Reset to defaults – Vidikron Vision 75 User Manual
Page 78
62
Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Changing either or both of these numbers changes the hue of the color and relocates the
“triangle” for possible colors. For example, changing the x/y coordinates for red moves the
color closer to either orange or violet, which in turn affects all displayed colors having a
red component.
To adjust the gamut:
1.
Select Gamut from the Advanced Options menu and press ENTER.
2.
To do an automatic gamut adjustment, highlight “Enter” and press ENTER. If further
calibration is necessary, continue with the next step.
3.
Highlight “Settings” and press
or
to select “Manual.”
4.
Highlight “White” and press ENTER. The Vision 65/75 displays a white field on the screen.
5.
Using the color analyzer, measure the x and y coordinates for about 15 seconds. Make a
note of the results.
6.
Press EXIT or ENTER.
7.
Highlight “White” and press
.
8.
Press ENTER to select the first digit of the x coordinate value for White (obtained in
Step 5).
9.
Press
or
repeatedly to set the digit.
10. Press
to select the next digit; use the
and
buttons to change it.
11. Repeat Step 10 for the third digit.
12. Press ENTER.
13. Press
to highlight the “y” coordinate value for White. Then, press ENTER to select the
first digit.
14. Repeat Steps 9 through 12 to set the “y” coordinate value for White.
15. Press
to highlight the “Y” coordinate value. Then press ENTER to select the first digit.
16. Repeat Steps 9 through 12 to set the “Y” coordinate value for White.
17. Press EXIT.
18. Repeat Steps 4 through 17 for Red, Green, Blue and D. White (Desired White).
19. Highlight “Save” and press ENTER.
To undo the effects of a previous calibration, highlight “Settings” and press
or
to select
“Default.”
Reset to Defaults: To restore the ISF default image settings for the current input source
ONLY, select Reset to Defaults and press the
button to highlight “Yes.” Then, press ENTER.
To perform these adjustments, you will need a color analyzer (Sencore
ColorPro 5000 software and ColorPro III sensor, or equivalent).
Note
Settings
Manual
White
x:312
y:329
Y:045
Red
x:640
y:330
Y:015
Green
x:300
y:600
Y:022
Blue
x:150
y:060
Y:018
D. White
x:312
y:329
Y:045
Enter
Save
Color Temp.
6500
White
x:000
y:000
Y: 000