Keep-warm mode, Refill light, Cleaning and maintenance – Philips HD9140 User Manual

Page 10: Descaling

Advertising
background image

keep-warm mode

The steamer automatically switches to the keep-warm mode after any menu. The food is kept warm

for 20 minutes. The light ring round the keep-warm button lights up and the light ring round the

menu button goes out.

- If you want to keep the food warm longer than 20 minutes, press the on/stop button within 1

minute after the first keep-warm cycle has finished to start another keep-warm cycle (Fig. 14).

- If you want to deactivate the keep-warm mode when it is active, press the on/stop button.

- If you want to start a keep-warm cycle when the appliance is off or after it has switched off

automatically, first press the on/stop button and then the keep-warm button (Fig. 16).
refill light

When the water level in the water tank drops below the MIN level, the refill light flashes and

you hear a beep to indicate that you have to refill the water tank.

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone

to clean the appliance.

1

Remove the plug from the wall socket and let the appliance cool down.

2

Clean the outside of the base with a moist cloth.

Never immerse the base in water, nor rinse it under the tap.
Do not clean the base in the dishwasher.

3

Clean the water tank with a cloth soaked in warm water with some washing-up liquid. Raise

the sieve in the water tank to clean it. Then wipe the water tank with a clean moist cloth.

If the sieve in the water tank becomes detached, keep it out of the reach of children to prevent

them from swallowing it.

4

Remove the bottoms from steaming bowls 2 and/or 3. Clean steaming bowls 1, 2 and 3, the

XL steaming bowl and the lid by hand or in the dishwasher. Use a short cycle and a low

temperature.

Repeated cleaning of steaming bowls 1, 2 and 3, the XL steaming bowl and the lid in a dishwasher

may result in a slight dulling of these parts.

Descaling

You have to descale the appliance after it has been used for 15 hours. The descaling light flashes for

1 hour to indicate that you have to descale the food steamer. It is important that you descale the

food steamer regularly to maintain optimal performance and to extend the lifetime of the appliance.
Note: The descaling light always flashes for 1 hour while the appliance is in use, even if you have descaled

the appliance. If you do not descale the appliance within this 1 hour, the descaling light automatically

goes out. It goes on again after you have used the appliance for another 15 hours.

1

Fill the water tank with white vinegar (8% acetic acid) up to the maximum level.

Do not use any other kind of descaler.

2

Put the drip tray and steaming bowl 1 on the base properly (Fig. 7).

3

Put the lid on top of steaming bowl 1 (Fig. 10).

4

Put the plug in the wall socket.

5

Press a menu button and the + or - button to let the appliance operate for 25 minutes.

EnglisH

10

Advertising