ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 181
Chapter 10 Wireless LAN
ZyWALL 2WG User’s Guide
181
Figure 86 WLAN Port Role Example
"
Do the following if you are configuring from a computer connected to a LAN,
DMZ or WLAN port and changing the port's role:
1 A port's IP address varies as its role changes, make sure your computer's IP address is in
the same subnet as the ZyWALL's LAN, DMZ or WLAN IP address.
2 Use the appropriate LAN, DMZ or WLAN IP address to access the ZyWALL.
To change your ZyWALL’s port role settings, click NETWORK > WLAN > Port Roles. The
screen appears as shown.
The radio buttons correspond to Ethernet ports on the front panel of the ZyWALL. On the
ZyWALL, ports 1 to 4 are all LAN ports by default.
"
Your changes are also reflected in the LAN and/or DMZ Port Roles screen.
Figure 87 NETWORK > WLAN > Port Roles