Figure 202 edit ip policy route, Table 120 advanced > policy route > edit – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 352
Chapter 19 Policy Route
ZyWALL 2WG User’s Guide
352
Figure 202 Edit IP Policy Route
The following table describes the labels in this screen.
Table 120 ADVANCED > POLICY ROUTE > Edit
LABEL
DESCRIPTION
Criteria
Active
Select the check box to activate the policy.
Rule Index
This is the index number of the policy route.
IP Protocol
Select Predefined and then the IP protocol from ALL(0), ICMP(1), IGMP(2),
TCP(6), UDP(17), GRE(47), ESP(50) or AH(51).
Otherwise, select Custom and enter a number from 0 to 255.
Type of Service
Prioritize incoming network traffic by choosing from Any, Normal, Min Delay, Max
Thruput, Max Reliable or Mix Cost.
Precedence
Precedence value of the incoming packet. Select a value from 0 to 7 or Any.
Packet Length
Type a length of packet (in bytes). The operators in the Len Compare field apply
to incoming packets of this length.