ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 63)

Chapter 2 Introducing the Web Configurator
ZyWALL 2WG User’s Guide
63
Figure 10 Web Configurator HOME Screen in Bridge Mode
The following table describes the labels in this screen.
Table 4 Web Configurator HOME Screen in Bridge Mode
LABEL DESCRIPTION
Automatic
Refresh Interval
Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not update the
screen statistics.
Refresh Click this button to update the screen’s statistics immediately.
System
Information
System Name This is the System Name you enter in the MAINTENANCE > General screen. It is
for identification purposes. Click the field label to go to the screen where you can
specify a name for this ZyWALL.
Model This is the model name of your ZyWALL.
Bootbase
Version
This is the bootbase version and the date created.
Firmware
Version
This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
proprietary Network Operating System design. Click the field label to go to the
screen where you can upload a new firmware file.
Up Time This field displays how long the ZyWALL has been running since it last started up.
The ZyWALL starts up when you turn it on, when you restart it (MAINTENANCE >
Restart), or when you reset it (see Section 2.3 on page 57 ).
System Time This field displays your ZyWALL’s present date (in yyyy-mm-dd format) and time
(in hh:mm:ss format) along with the difference from the Greenwich Mean Time
(GMT) zone. The difference from GMT is based on the time zone. It is also
adjusted for Daylight Saving Time if you set the ZyWALL to use it. Click the field
label to go to the screen where you can modify the ZyWALL’s date and time
settings.