ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 193)

Chapter 10 Wireless LAN
ZyWALL 2WG User’s Guide
193
Figure 95 NETWORK > WIRELESS CARD > Security: 802.1x + Static WEP
The following table describes the labels in this screen.
Table 63 NETWORK > WIRELESS CARD > Security: 802.1x + Static WEP
LABEL DESCRIPTION
Name Type a name to identify this security profile.
Security Mode Select 8021X-Static64 or 8021X-Static128 from the drop-down list.
Key 1 to Key 4 If you chose 8021X-Static64 in the Security Mode field, then enter any 5
characters (ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by
0x for each key.
If you chose 8021X-Static128 in the Security Mode field, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the
same on the access points as they are on the wireless clients.
ReAuthentication
Timer
Specify how often wireless clients have to resend user names and passwords in
order to stay connected. Enter a time interval between 600 and 65535 seconds.
If wireless client authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout The ZyWALL automatically disconnects a wireless client from the wireless network
after a period of inactivity. The wireless client needs to send the username and
password again before it can use the wireless network again. Some wireless clients
may prompt users for a username and password; other clients may use saved login
credentials. In either case, there is usually a short delay while the wireless client
logs in to the wireless network again.
This value is usually smaller when the wireless network is keeping track of how
much time each wireless client is connected to the wireless network (for example,
using an authentication server). If the wireless network is not keeping track of this
information, you can usually set this value higher to reduce the number of delays
caused by logging in again.
Enter a time interval between 600 and 65535 seconds.
Authentication
Databases
Click Local User to go to the Local User Database screen where you can view
and/or edit the list of users and passwords. Click RADIUS to go to the RADIUS
screen where you can configure the ZyWALL to check an external RADIUS server.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.