ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 530)

Chapter 36 IP Static Route Setup
ZyWALL 2WG User’s Guide
530
Figure 318 Menu 12: IP Static Route Setup
Now, enter the index number of the static route that you want to configure.
Figure 319 Menu 12. 1: Edit IP Static Route
`The following table describes the IP Static Route Menu fields.
Menu 12 - IP Static Route Setup
1.Reserved 16.________
2.Reserved 17.________
3.________ 18.________
4.________ 19.________
5.________ 20.________
6.________ 21.________
7.________ 22.________
8.________ 23.________
9.________ 24.________
10.________ 25.________
11.________ 26.________
12.________ 27.________
13.________ 28.________
14.________ 29.________
15.________ 30.________
Enter selection number:
Menu 12.1 - Edit IP Static Route
Route #: 3
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to CONFIRM or ESC to CANCEL:
Table 216 Menu 12. 1: Edit IP Static Route
FIELD DESCRIPTION
Route # This is the index number of the static route that you chose in menu 12.
Route Name Enter a descriptive name for this route. This is for identification purposes only.
Active This field allows you to activate/deactivate this static route.
Destination IP
Address
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host,
use a subnet mask of 255.255.255.255 in the subnet mask field to force the network
number to be identical to the host ID.