ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 308)

Chapter 15 Certificates
ZyWALL 2WG User’s Guide
308
15.9 My Certificate Create
Click SECURITY > CERTIFICATES > My Certificates > Create to open the My
Certificate Create screen. Use this screen to have the ZyWALL create a self-signed
certificate, enroll a certificate with a certification authority or generate a certification request.
Figure 176 SECURITY > CERTIFICATES > My Certificates > Create
The following table describes the labels in this screen.
Table 98 SECURITY > CERTIFICATES > My Certificates > Create
LABEL DESCRIPTION
Certificate Name Type up to 31 ASCII characters (not including spaces) to identify this
certificate.
Subject Information Use these fields to record information that identifies the owner of the
certificate. You do not have to fill in every field, although the Common Name
is mandatory. The certification authority may add fields (such as a serial
number) to the subject information when it issues a certificate. It is
recommended that each certificate have unique subject information.
Common Name Select a radio button to identify the certificate’s owner by IP address, domain
name or e-mail address. Type the IP address (in dotted decimal notation),
domain name or e-mail address in the field provided. The domain name or e-
mail address can be up to 31 ASCII characters. The domain name or e-mail
address is for identification purposes only and can be any string.