ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 659
Advertising
Appendix D Setting up Your Computer’s IP Address
ZyWALL 2WG User’s Guide
659
"
Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.
Figure 434 Red Hat 9.0: KDE: Network Configuration: Devices
2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
Figure 435 Red Hat 9.0: KDE: Ethernet Device: General
Advertising