Figure 399 menu 24.11 – remote management control, Table 240 menu 24.11 – remote management control – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 608
Chapter 44 Remote Management
ZyWALL 2WG User’s Guide
608
Figure 399 Menu 24.11 – Remote Management Control
The following table describes the fields in this screen.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = Disable
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN+WAN1+DMZ+WLAN+WAN2
Secure Client IP = 0.0.0.0
SSH Server: Certificate = auto_generated_self_signed_cert
Port = 22 Access = LAN+WAN1+DMZ+WLAN+WAN2
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443 Access = LAN+WAN1+DMZ+WLAN+WAN2
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = LAN+WAN1+DMZ+WLAN+WAN2
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = LAN+WAN1+DMZ+WLAN+WAN2
Secure Client IP = 0.0.0.0
DNS Service: Port = 53 Access = LAN+WAN1+DMZ+WLAN+WAN2
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 240 Menu 24.11 – Remote Management Control
FIELD
DESCRIPTION
Telnet Server
FTP Server
SSH Server
HTTPS Server
HTTP Server
SNMP Service
DNS Service
Each of these read-only labels denotes a service that you may use to remotely
manage the ZyWALL.
Port
This field shows the port number for the service or protocol. You may change the
port number if needed, but you must use the same port number to access the
ZyWALL.
Access
Select the access interface (if any) by pressing [SPACE BAR], then [ENTER] to
choose from: LAN, WAN, LAN+WAN, DMZ, LAN+DMZ, WAN+DMZ,
LAN+WAN+DMZ, WLAN, LAN+WLAN, WAN+WLAN, LAN+WAN+WLAN,
DMZ+WLAN, LAN+DMZ+WLAN, WAN+DMZ+WLAN, LAN+WAN+DMZ+WLAN
or Disable.
Secure Client IP
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyWALL. Enter an IP address to restrict access to a client with a matching IP
address.
Certificate
Press [SPACE BAR] and then [ENTER] to select the certificate that the ZyWALL
will use to identify itself. The ZyWALL is the SSL server and must always
authenticate itself to the SSL client (the computer which requests the HTTPS
connection with the ZyWALL).