1 layer-2 isolation examples – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 130
Chapter 9 Other Wireless Configuration
ZyXEL NWA-3500 User’s Guide
130
Figure 72 WIRELESS > Layer-2 Isolation Configuration Screen
The following table describes the labels in this screen.
9.3.1 Layer-2 Isolation Examples
The following section shows you example layer-2 isolation configurations on the ZyXEL
Device (A).
Table 38 WIRELESS > Layer-2 Isolation Configuration
LABEL
DESCRIPTION
Profile Name
Type a name to identify this layer-2 isolation profile.
Allow devices with
these MAC
addresses
These are the MAC address of a wireless client, AP, computer or router. A
wireless client associated with the ZyXEL Device can communicate with another
wireless client, AP, computer or router only if the MAC addresses of those devices
are listed in this table.
Set
This is the index number of the MAC address.
MAC Address
Type the MAC addresses of the wireless client, AP, computer or router that you
want to allow the associated wireless clients to have access to in these address
fields. Type the MAC address in a valid MAC address format (six hexadecimal
character pairs, for example 12:34:56:78:9a:bc).
Description
Type a name to identify this device.
Apply
Click Apply to save your changes.
Reset
Click Reset to begin configuring this screen afresh.