ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 257)

ZyXEL NWA-3500 User’s Guide
257
A
P P E N D I X
A
Product Specifications
The following tables summarize the ZyXEL Device’s hardware and firmware features.
Table 93 Hardware Specifications
Power Specification 12 V DC, 1 A
Reset button Returns all settings to their factory defaults.
Ethernet Port • Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-
duplex mode.
• Auto-crossover: Use either crossover or straight-through Ethernet
cables.
Power over Ethernet
(PoE)
IEEE 802.3af compliant.
Console Port One MIL-C-5015 style RS-232 console port
Antenna SMA antenna connectors, equipped by default with 2dBi omni antenna, 60°
When facing the front of the ZyXEL Device, the antenna on the right is used
by wireless LAN adaptor WLAN1, and the antenna on the left is used by
wireless LAN adaptor WLAN2.
Operation Temperature 0 ~ 50 º C
Storage Temperature -30 ~ 60 º C
Operation Humidity 10 ~ 90 % (non-condensing)
Storage Humidity 5 ~ 95 % (non-condensing)
Dimensions 212.5mm x 138.5mm x 52mm
Distance between the
centers of wall-mounting
holes on the device’s
back.
80 mm
Screw size for wall-
mounting
6mm ~ 8mm (0.24" ~ 0.31") head width.
Table 94 Firmware Specifications
Default IP Address 192.168.1.2
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
Wireless LAN Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g
Wireless security WEP, WPA(2), WPA(2)-PSK, 802.1x
Layer 2 isolation Prevents wireless clients associated with your ZyXEL Device from
communicating with other wireless clients, APs, computers or routers in
a network.