ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 196)

Chapter 16 VLAN
ZyXEL NWA-3500 User’s Guide
196
• Enter a Policy friendly name that describes the policy. Each Remote Access Policy will
be matched to one VLAN Group. An example may be, Allow - VLAN 10 Policy.
• Click Next.
Figure 116 New Remote Access Policy for VLAN Group
2 The Conditions window displays. Select Add to add a condition for this policy to act on.
3 In the Select Attribute screen, click Windows-Groups and the Add button.
Figure 117 Specifying Windows-Group Condition
4 The Select Groups window displays. Select a remote access policy and click the Add
button. The policy is added to the field below. Only one VLAN Group should be
associated with each policy.
5 Click OK and Next in the next few screens to accept the group value.