ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 69)

Chapter 4 Tutorial
ZyXEL NWA-3500 User’s Guide
69
2 In the Period (min.) field, enter how often you want the ZyXEL Device to scan for
rogue APs. You can have the ZyXEL Device scan anywhere from once every ten
minutes to once every hour. In this example, enter “10”.
3 Click Apply.
4.3.3 Set Up E-mail Logs
In this section, you will configure the first of your four APs to send a log message to your e-
mail inbox whenever a rogue AP is discovered in your wireless network’s coverage area.
1 Click LOGS > Log Settings. The following screen appears.
Figure 35 Tutorial: Log Settings
• In this example, your mail server’s IP address is 192.168.1.25. Enter this IP address in the
Mail Server field.
• Enter a subject line for the alert e-mails in the Mail Subject field. Choose a subject that is
eye-catching and identifies the access point - in this example, “ALERT_Access_Point_A”.
• Enter the email address to which you want alerts to be sent ([email protected], in
this example).