ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 77)

Chapter 4 Tutorial
ZyXEL NWA-3500 User’s Guide
77
• Using Alice’s computer and wireless client, and the correct security settings, do the
following.
Attempt to access Server 1. You should be able to do so.
Attempt to access the Internet. You should be able to do so.
Attempt to access Server 2. You should be unable to do so. If you can do so, layer-2
isolation is misconfigured.
• Using Alice’s computer and wireless client, and incorrect security settings, attempt to
associate with the SERVER_1 network. You should be unable to do so. If you can do
so, security is misconfigured.
• Using another computer and wireless client, but with the correct security settings,
attempt to associate with the SERVER_1 network. You should be unable to do so. If
you can do so, MAC filtering is misconfigured.
2 Test the SERVER_2 network.
• Using Bob’s computer and wireless client, and the correct security settings, do the
following.
Attempt to access Server 2. You should be able to do so.
Attempt to access the Internet. You should be able to do so.
Attempt to access Server 1. You should be unable to do so. If you can do so, layer-2
isolation is misconfigured.
• Using Bob’s computer and wireless client, and incorrect security settings, attempt to
associate with the SERVER_2 network. You should be unable to do so. If you can do
so, security is misconfigured.
• Using another computer and wireless client, but with the correct security settings,
attempt to associate with the SERVER_2 network. You should be unable to do so. If
you can do so, MAC filtering is misconfigured.
If you cannot do something that you should be able to do, check the settings as described in
Section 4.4.6.1 on page 76 , and in the individual Security, layer-2 isolation and MAC filter
profiles for the relevant network. If this does not help, see the Troubleshooting chapter in this
User’s Guide.