ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 246)

Chapter 25 System Maintenance and Information
ZyXEL NWA-3500 User’s Guide
246
25.2.1 Resetting the Time
The ZyXEL Device resets the time in three instances:
1 On leaving menu 24.10 after making changes.
2 When the ZyXEL Device starts up, if there is a timeserver configured in menu 24.10.
3 24-hour intervals after starting.
25.3 Remote Management Setup
25.3.1 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next.
New Date Enter the new date in year, month and day format.
Time Zone Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving If you use daylight savings time, then choose Yes.
Start Date Configure the day and time when Daylight Saving Time starts if you selected
Enable Daylight Saving. The at field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time starts in most parts of the United States on the first
Sunday of April. Each time zone in the United States starts using Daylight
Saving Time at 2 A.M. local time. So in the United States you would select
First, Sunday, April and type 2 in the at field.
Daylight Saving Time starts in the European Union on the last Sunday of
March. All of the time zones in the European Union start using Daylight Saving
Time at the same moment (1 A.M. GMT or UTC). So in the European Union
you would select Last, Sunday, March. The time you type in the at field
depends on your time zone. In Germany for instance, you would type 2
because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
End Date Configure the day and time when Daylight Saving Time ends if you selected
Enable Daylight Saving. The o'clock field uses the 24 hour format. Here are
a couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2
A.M. local time. So in the United States you would select Last, Sunday,
October and type 2 in the at field.
Daylight Saving Time ends in the European Union on the last Sunday of
October. All of the time zones in the European Union stop using Daylight
Saving Time at the same moment (1 A.M. GMT or UTC). So in the European
Union you would select Last, Sunday, October. The time you type in the at
field depends on your time zone. In Germany for instance, you would type 2
because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel” to save your configuration, or press [ESC] to cancel.
Table 91 System Maintenance: Time and Date Setting
FIELD DESCRIPTION