1 system statistics, Figure 131 system status: show statistics, Table 73 system status: show statistics – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 206
Chapter 17 Maintenance
ZyXEL NWA-3500 User’s Guide
206
17.2.1 System Statistics
Click Maintenance > Show Statistics. Read-only information here includes port status,
packet specific statistics and bridge link status. Also provided are "system up time" and "poll
interval(s)". The Poll Interval field is configurable. The fields in this screen vary according to
the current wireless mode of each WLAN adaptor.
Figure 131 System Status: Show Statistics
The following table describes the labels in this screen.
Table 73 System Status: Show Statistics
LABEL
DESCRIPTION
Port
This is the Ethernet port (LAN) or wireless LAN adaptor (WLAN1 or WLAN2).
Status
This shows the port speed and duplex setting if you are using Ethernet
encapsulation for the Ethernet port. Ethernet port connections can be in half-
duplex or full-duplex mode. Full-duplex refers to a device's ability to send and
receive simultaneously, while half-duplex indicates that traffic can flow in only
one direction at a time. The Ethernet port must use the same speed or duplex
mode setting as the peer Ethernet port in order to connect.
This shows the transmission speed only for the wireless adaptors.
TxPkts
This is the number of transmitted packets on this port.
RxPkts
This is the number of received packets on this port.
Collisions
This is the number of collisions on this port.
Tx B/s
This shows the transmission speed in bytes per second on this port.