Lan setup, 1 lan setup, 2 tcp/ip ethernet setup – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 225: Chapter 20 lan setup, 1 lan setup 20.2 tcp/ip ethernet setup, Lan setup (225)
ZyXEL NWA-3500 User’s Guide
225
C
H A P T E R
20
LAN Setup
This chapter shows you how to configure the LAN on your ZyXEL Device.
20.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 – LAN Setup. From the
main menu, enter “3” to display menu 3.
Figure 150 Menu 3 LAN Setup
Detailed explanation about the LAN Setup menu is given in the next chapter.
20.2 TCP/IP Ethernet Setup
Use menu 3.2 to configure your ZyXEL Device for TCP/IP.
To edit menu 3.2, enter “3” from the main menu to display Menu 3-LAN Setup. When menu
3 appears, type “2” and press [ENTER] to display Menu 3.2-TCP/IP Setup, as shown next
:
Figure 151 Menu 3.2 TCP/IP Setup
Menu 3 - LAN Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Menu 3.2 - TCP/IP Setup
IP Address Assignment= Static
IP Address= 192.168.1.2
IP Subnet Mask= 255.255.255.0
Gateway IP Address= 0.0.0.0