ZyXEL Communications ZyXEL ZyAIR NWA-3500 - Manual (Page 251)

ZyXEL NWA-3500 User’s Guide
251
C
H A P T E R
26
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• ZyXEL Device Access and Login
• Internet Access
26.1 Power, Hardware Connections, and LEDs
V
The ZyXEL Device does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the ZyXEL Device.
2 Make sure the power adaptor or cord is connected to the ZyXEL Device and plugged in
to an appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the ZyXEL Device.
4 If the problem continues, contact the vendor.
V
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.6 on page 40 .
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the ZyXEL Device.
5 If the problem continues, contact the vendor.
26.2 ZyXEL Device Access and Login
V
I forgot the IP address for the ZyXEL Device.