Introducing the smt, 1 introduction to the smt, 2 accessing the smt via the console port – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 217: 1 initial screen, Chapter 18 introducing the smt, Introducing the smt (217)
ZyXEL NWA-3500 User’s Guide
217
C
H A P T E R
18
Introducing the SMT
This chapter describes how to access the SMT and provides an overview of its menus
.
18.1 Introduction to the SMT
The ZyXEL Device’s SMT (System Management Terminal) is a menu-driven interface that
you can access from a terminal emulator through the console port or over a telnet connection.
This chapter shows you how to access the SMT (System Management Terminal) menus, how
to navigate the SMT and how to configure SMT menus.
18.2 Accessing the SMT via the Console Port
Make sure you have the physical connection properly set up as described in the Quick Start
Guide.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
• VT100 terminal emulation.
• 9600 Baud.
• No parity, 8 data bits, 1 stop bit, flow control set to none.
18.2.1 Initial Screen
When you turn on your ZyXEL Device, it performs several internal tests.
After the tests, the ZyXEL Device asks you to press [ENTER]
to continue, as shown next.