Figure 148 smt main menu, Table 79 main menu commands – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual

Page 221

Advertising
background image

Chapter 18 Introducing the SMT

ZyXEL NWA-3500 User’s Guide

221

Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

After you enter the password, the SMT displays the main menu, as shown next.

Figure 148 SMT Main Menu

Table 79 Main Menu Commands

OPERATION

KEYSTROKE

DESCRIPTION

Move down to

another menu

[ENTER]

To move forward to a submenu, type in the number of the

desired submenu and press [ENTER].

Move up to a

previous menu

[ESC]

Press [ESC] to move back to the previous menu.

Move to a “hidden”

menu

Press [SPACE

BAR] to change No

to Yes then press

[ENTER].

Fields beginning with “Edit” lead to hidden menus and

have a default setting of No. Press [SPACE BAR] once to

change No to Yes, then press [ENTER] to go to the

“hidden” menu.

Move the cursor

[ENTER] or [UP]/

[DOWN] arrow

keys.

Within a menu, press [ENTER] to move to the next field.

You can also use the [UP]/[DOWN] arrow keys to move to

the previous and the next field, respectively.

Entering

information

Type in or press

[SPACE BAR], then

press [ENTER].

You need to fill in two types of fields. The first requires you

to type in the appropriate information. The second allows

you to cycle through the available choices by pressing

[SPACE BAR].

Required fields

<

?

> or ChangeMe

All fields with the symbol <?> must be filled in order to be

able to save the new configuration.
All fields with ChangeMe must not be left blank in order to

be able to save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This

symbol refers to an option that is Not Applicable.

Save your

configuration

[ENTER]

Save your configuration by pressing [ENTER] at the

message “Press ENTER to confirm or ESC to cancel”.

Saving the data on the screen will take you, in most cases

to the previous menu.

Exit the SMT

Type “99”, then

press [ENTER].

Type 99 at the main menu prompt and press [ENTER] to

exit the SMT interface.

Copyright (c) 1994 - 2006 ZyXEL Communications Corp.

NWA-3500 Main Menu

Getting Started Advanced Management
1. General Setup 22. SNMP Configuration
3. LAN Setup 23. System Security
24. System Maintenance

99. Exit

Enter Menu Selection Number:

Advertising