6 configuration screen – ZyXEL Communications ZyXEL ZyAIR NWA-3500 User Manual
Page 210
Chapter 17 Maintenance
ZyXEL NWA-3500 User’s Guide
210
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyXEL Device again.
Figure 135 Firmware Upload In Process
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 136 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Figure 137 Firmware Upload Error
17.6 Configuration Screen
See
for information on how to transfer configuration files using FTP/
TFTP commands.
Click MAINTENANCE > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.