Setting pdl emulations n3.3, Setting pdl emulations – Xerox 7245 User Manual
Page 250
250
Setting PDL Emulations
N3.3
To set the PDL (Page Description Language) Emulations, used by the Device's Input Ports, perform the
following steps:
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click
the
Properties
tab.
3. Click the folder in the directory tree labeled Emulation Settings.
4. Click on the Print Mode hot link to access a list of the Device's Input Ports, displaying the Page
Description Language emulations they are currently using.
5. Depending upon the Ports enabled at the Device, the list of displayed Ports includes: Parallel,
AppleTalk (with PostScript), SMB, NetWare, LPD, IPP and Port 9100. Typical Page Description
selections for each Port include: Auto (auto select), PostScript, HP-GL/2, PCL and TIFF.
6. Make your required setting changes, and click the rectangular Apply button to have the device
register the changes. To return settings to their previous values, without making changes, click the
Undo
button.