To set up an nt server to queue jobs to the device – Xerox 7245 User Manual

Page 45

Advertising
background image

45

To Set Up an NT Server to Queue Jobs to the Device

1. Make sure that the TCP/IP protocol and Microsoft TCP/IP Printing Services are enabled.

2. Install the Print Driver, select Local Port and create an LPR port.

3. When prompted for the port name, enter in the Device's SMB Host Name (WINS environment), or

fully qualified domain name

(SMB Host Name.Domain Name, in a DNS environment), or IP

Address

(if static). The Queue text box can be left blank.

4. Turn

on

Sharing

and enter in a Share Name that can be used by network users to identify the device

in the Server's list of available network printers.

5. To set up the individual workstations, use "Add printer," "Network Printer," and select the Server and

Device's Share Name from the list.

6. Print a Test Print to verify that you are successfully communicating with the device through the

Server.

Advertising