Xerox 7245 - Manual (Page 40)

40
Configuring Workgroup Name or Device Name with Internet Services
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties Tab.
3. Click the plus symbol (+) to the left of the Protocol Settings file folder.
4. Select SMB in the directory tree
5. The available selections include:
A text box indicating Workgroup name.
A text box indicating the SMB Host name.
An entry box for the maximum number of connections allowed, labeled Maximum Sessions.
A TBCP Filter checkbox (displayed when PostScript is enabled). Click Help for an explanation of the
use of this feature.
An enabling checkbox for Auto Driver Download, enabling the Device to push a driver to a client.
An enabling checkbox for supporting Unicode (supplying the Host name and Workgroup name in
Unicode characters during SMB transmission).
An enabling checkbox for Auto Master Mode. When the master browser for the workgroup cannot be
found, if this box is checked, this host will become the master browser.
An enabling checkbox for Password Encryption (during SMB transmission).
6. Accept the default value, or enter a value from 3 to 10, for maximum number of connections allowed
in Maximum Sessions.
7. Accept the Workgroup name shown, or enter in your own workgroup name.
8. Type the SMB Host Name or accept the name shown.
9. Click the Apply button, then click the Reboot button to reboot the device and apply setting changes.