Softkey function, System overview, Pfd softkeys – Garmin G1000 Socata TBM 850 User Manual

Page 32

Advertising
background image

Garmin G1000 Pilot’s Guide for the Socata TBM 850

190-00709-01 Rev. A

20

SYSTEM OVERVIEW

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

SOFTkEY FUNCTION

The softkeys are located along the bottoms of the displays. The softkeys shown depend on the softkey level

or page being displayed. The bezel keys below the softkeys can be used to select the appropriate softkey. When
a softkey is selected, its color changes to black text on gray background and remains this way until it is turned
off, at which time it reverts to white text on black background.

Softkey Names (displayed)

Figure 1-15 Softkeys (Second-Level PFD Configuration)

Bezel-Mounted Softkeys (press)

Softkey On

Another means of selecting softkeys is by using the MFD/PFD Control Unit:

To select a softkey using the MFD Control Unit:

1)

Move the softkey selection box to the desired softkey using the arrows of the SEL Key.

2)

Press the center of the SEL Key to select the desired softkey.

PFD SOFTKEYS

The CDI, IDENT, TMR/REF, NRST, and MSG Softkeys undergo a momentary change to black text on gray

background and automatically switch back to white text on black background when selected. If messages
remain after acknowledgement, the MSG Softkey is black on white.

The PFD softkeys provide control over flight management functions, including GPS, NAV, terrain, traffic,

and lightning (optional). Each softkey sublevel has a BACK Softkey which can be pressed to return to the
previous level. The MSG Softkey is visible in all softkey levels. For the top level softkeys and the transponder
(XPDR) levels, the IDENT Softkey remains visible.

INSET

Displays Inset Map in PFD lower left corner

OFF

Removes Inset Map

DCLTR (3)

Selects desired amount of map detail; cycles through declutter
levels:

DCLTR (No Declutter): All map features visible

DCLTR-1: Declutters land data

DCLTR-2: Declutters land and SUA data

DCLTR-3: Removes everything except for the active flight

plan

TRAFFIC

Displays traffic information on Inset Map

TOPO

Displays topographical data (e.g., coastlines, terrain, rivers, lakes)
and elevation scale on Inset Map

TERRAIN

Displays terrain information on Inset Map

NEXRAD

Displays NEXRAD weather and coverage information on Inset
Map (optional feature)

XM LTNG

Displays XM lightning information on Inset Map (optional fea-
ture)

Advertising