Garmin G1000 Socata TBM 850 - Manual (Page 80)

Garmin G1000 Pilot’s Guide for the Socata TBM 850 190-00709-01 Rev. A 68
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn a CRS Knob to select the desired course to/from the waypoint. Press a CRS Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. SUSP appears on the HSI at the lower right of the aircraft symbol. The OBS Softkey label
changes to indicate the suspension is active as shown in figure 2-32. Pressing the SUSP Softkey deactivates
the suspension and resumes automatic sequencing of waypoints.
Pressing the SUSP
Softkey Suspends
Waypoint Sequencing
Figure 2-32 Suspending Automatic Waypoint Sequencing
SUSP Annunciation