1 afcs controls, Automatic flight control system – Garmin G1000 Socata TBM 850 User Manual

Page 410

Advertising
background image

Garmin G1000 Pilot’s Guide for the Socata TBM 850

190-00709-01 Rev. A

398

AUTOMATIC FLIGHT CONTROL SYSTEM

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

7.1 AFCS CONTROLS

The AFCS Control Unit is positioned above the MFD, and has the following controls:

1

HDG Key

Selects/deselects Heading Select Mode

2

APR Key

Selects/deselects Approach Mode

3

NAV Key

Selects/deselects Navigation Mode

4

FD Key

Activates/deactivates the flight director only
Pressing once turns on the selected flight director in the default vertical and lateral

modes. Pressing again deactivates the flight director and removes the Command
Bars. If the autopilot is engaged, the key is disabled.

5

XFR Key

Transfers between the active flight director and standby flight director

6

ALT Key

Selects/deselects Altitude Hold Mode

7

VS Key

Selects/deselects Vertical Speed Mode

8

FLC Key

Selects/deselects Flight Level Change Mode

9

17

CRS Knobs

Adjust the Selected Course (while in VOR, LOC, or OBS Mode) in 1° increments on

the Horizontal Situation Indicator (HSI) of the corresponding PFD

Press to re-center the Course Deviation Indicator (CDI) and return course pointer

directly TO the bearing of the active waypoint/station

10

SPD Key

Toggles Airspeed Reference between IAS and Mach for Flight Level Change Mode

11

NOSE UP/DN

Wheel

Adjusts the reference in Pitch Hold, Vertical Speed, and Flight Level Change

modes

12

VNV Key

Selects/deselects Vertical Path Tracking Mode for Vertical Navigation flight control

13

ALT SEL Knob Controls the Selected Altitude in 100-ft increments (a finer resolution of 10 feet is

available under approach conditions)

14

YD Key

Engages/disengages the yaw damper

15

AP Key

Engages/disengages the autopilot

16

BANK Key

Manually selects/deselects Low Bank Mode

18

BC Key

Selects/deselects Backcourse Mode

19

HDG Knob

Adjusts the Selected Heading and bug in 1° increments on the HSI (both PFDs)
Press to synchronize the Selected Heading to the current heading on the pilot-side PFD

1

2

3

4

5

6

7

8

Annunciator Light

10

9

17

16

15

14

13

12

11

18

19

Figure 7-1 GMC 710 AFCS Control Unit

Advertising