Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD - Manual (Page 12)

Once you’ve removed the center link from the vehicle, compare it to the Hotchkis center link for
proper orientation.
SPECIAL NOTE:
We include new steering tie rod turnbuckles for customers with disc brake conversions that utilize the
5/8” inner tie rods with 11/16” outer tie rods. If you have 5/8” inner and outer tie rods, then you
may use your stock steering turnbuckles for this installation.
2
Reinstalling Hotchkis Center link
Reinstall the Hotchkis Center link in the same manner as stock removal. Reuse or purchase new cotter
pins for all of the castle nuts. (Available at your local auto parts store). Reinstall all castle nuts and
cotter pins in the center link.
3
Reinstall Front Sway Bar End Links
If your truck was equipped with a front sway bar, use the new end links included with your a‐arms. If
you do not have a front sway bar, you may remove these end links from the arms. We highly
recommend the use of sway bars with this kit. You are now finished with this installation.
• You will need to perform a front end wheel alignment after this installation.