Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD - Manual (Page 20)

At this point, the only thing holding the upper a‐arm to the car is the cross shaft. Undo the 2 nuts for
each arm that secure the cross shaft to the chassis. The a‐arms should be loose from the vehicle at this
point.
5
Reinstall the Hothckis Upper A-arms
Reinstall the Hotchkis a‐arms in the same manner as removal. The a‐arms are side specific, so please
take caution when installing them. There are labels for “driver” and “passenger” located near the ball
joints.