Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD - Manual (Page 17)

Thank you for your purchase from our new line of Chevy parts.
Please call us at 877 ‐ 4NO ‐ ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
IMPORTANT: PLEASE READ THE ENTIRE INSTRUCTION MANUAL BEFORE
STARTING THIS INSTALLATION. THIS KIT IS INTENDED FOR TRUCKS WITH 71‐72 OR 73‐87 DISC BRAKE
SPINDLES. YOU MUST HAVE MECHANICAL KNOWLEDGE AND EXPERIENCE TO PERFORM THIS
INSTALLATION. IF YOU ARE UNCERTAIN WITH THE PROCEDURE FOR THIS KIT PLEASE HAVE THE
INSTALLATION PERFORMED BY A PROFESSIONAL TECHNICIAN.
1
Raise the Truck
Raise the vehicle by using a drive‐on alignment rack. Securely block the rear wheels of the vehicle. You
may also use jack stands to suspend the truck from the ground if a lift is not available. Raise the
chassis so the front wheels are off the ground.
Installation of Hotchkis Upper A-Arms