Mount bar onto truck, Install end links – Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD User Manual
Page 66
Advertising
4F
Mount Bar onto Truck
Position the sway bar up to the frame mounts. Using the 3/8” hardware from the kit,
start fastening the bushing brackets onto the frame mounts. Do not fully tighten
these yet.
5F
Install End Links
The front lower a-arms have an existing hole that the sway bar end links will
utilize.
First open up the 25108 end link kit. Grab the long bolt along with a large washer
and bushing. Insert the bolt/washer/bushing into the sway bar hole from the top.
Advertising