Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD User Manual

Page 95

Advertising
background image

67-72 C-10 Truck Front Shocks

_____________________________________________________________________________8

633 Sorensen Ave. Santa Fe Springs CA 90670 Hotchkis.net


4) Position the driver side Hotchkis bracket in place with the supplied ½” bolt passing through the top hole

to position it properly. Once in place, mark the frame rail for the lower hole. Drill this out using the ½” drill
as well. With both top and bottom holes drilled. Install the included ½” hardware to mount the bracket.
Make sure to use the supplied washers for the bolt head and the nylock nut. Fully tighten.

Advertising