Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD - Manual (Page 54)

4R
Install Hotchkis Rear Coils
Install the coil spring in the same manner as stock removal. Your kit includes new hardware
for the stock retainers. Always install the split lock washers on the nut side of the nut/bolt
assembly.
5R
*Optional Spacers
Your Hotchkis spring kit comes with optional spacers for the rear coils. If you are prone to
having a load in the bed, then it may be beneficial to use these spacers. The kit has 4
spacers, each ¼” thick. Each spacer will raise the rear of the vehicle by ¼”. You can use up
to 2 spacers per side to give a total lift of ½”. To install, Place the spacers between the coil
spring and the truck arm during procedure step 4R.