Install hotchkis coils, Reverse steps 3f to 7f – Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD User Manual
Page 52
Advertising
9F
Install Hotchkis Coils
Install the coil spring in the same manner as stock removal. Make sure to clock and index the
bottom coil in the lower control arm properly. You also want to make sure the upper coil is
seated in the top pocket properly as well. If you have our Hotchkis Lower Control Arms
(#11390L), make sure the upper coil is seated properly and the lower polyurethane isolator is
clocked properly in the Hotchkis arm.
10F
Reverse steps 3F to 7F
Perform the same procedure in reverse order to finish installing the front springs.
Advertising