Hotchkis 80390 TVS System, Stage 1, 67-72 C-10 Small Block, 4'-6' Drop, 2WD - Manual (Page 96)

67-72 C-10 Truck Front Shocks
_____________________________________________________________________________8
633 Sorensen Ave. Santa Fe Springs CA 90670 Hotchkis.net
5) Repeat this process on the passenger side. The pass. side does not have an existing top hole to use as
a guide, but you can still use the small hole facing you as a reference point. Use the bracket as a guide to
mark your two holes and drill. Bolt together in the same manner as the driver side.
6) Install your Hotchkis tuned Bilstein shocks in the same manner as removal. Only this time the upper
mount attaches to the Hotchkis bracket. The bushing stud on the top end of the shock should point toward
the rear of the car.