Preparing the vertical drive (continued) – Grain Systems Unload Augers PNEG-1556 User Manual
Page 10
Advertising
![background image](/manuals/277531/10/background.png)
3. Installation
10
PNEG-1556 8", 10" and 12" Commercial Vertical Drive Unit - Dual Drive
Preparing the Vertical Drive (Continued)
B. Attach the 60° spout over the discharge opening on the vertical tube. Secure the half band and spout
with 5/16" x 1-1/2" hex bolts and nylock nuts.
C. Attach the half band and the mounting bracket pivot band 56-1/2" below the bottom of the spout,
1/3
rd
of the tube length, using four (4) 3/8" x 1-1/2" hex bolts and 3/8" nylock nuts.
Figure 3B
Advertising