Grain Systems Unload Augers PNEG-1556 - Manual (Page 20)

3. Installation
20 PNEG-1556 8", 10" and 12" Commercial Vertical Drive Unit - Dual Drive
Installing the Belt Guard Brackets
A. Align the slots on the belt guard mounting brackets with the open holes on the bearing plate.
B. Secure each bracket with the appropriate hex bolts, flat washers and serrated flange nuts.
(See Figure 3L below and Figure 3M on Page 21.)
Figure 3L
Belt Guard Bracket Attachment Hardware Size
8" Four (4) 5/16" x 1" Grade 5 Hex Bolts, Flat Washers and Serrated Flange Nuts
10" and 12" Four (4) 3/8" x 1-1/4" Grade 5 Hex Bolts, Flat Washers and Serrated Flange Nuts