Grain Systems Unload Augers PNEG-1556 - Manual (Page 7)

PNEG-1556 8", 10" and 12" Commercial Vertical Drive Unit - Dual Drive 7
2. Decals
Decals Section
Check the components shown on Page 8 to ensure that the safety decals are in place and in good
condition. If a decal cannot be easily read for any reason or has been painted over, replace it immediately.
Contact your dealer or the manufacturer to order the replacement decal free of charge.
Decal Parts List
DANGER Decal No. DC-1395 was supplied with your bin unloading equipment. This safety sign should
be applied to the side of the bin near the bin opening, so it will be viewed by people entering into the bin
storage building. Do not cover any safety signs or any other signs that are already present.
NOTE: Safety signs provide important safety information for people working near bin unloading equipment
that is in operation.
Part # Description Size
DC-834 DANGER - Unloading Auger 9" x 3-3/4"
DC-455 DANGER - Rotating Auger 4" x 5-3/4"
DC-994 DANGER - Shear Point 4-1/2" x 2"
DC-1379 DANGER - Notice 5-1/8" x 7-3/8"
DC-1234 CAUTION 2-1/4" x 2-3/4"
DC-1381 DANGER - Auger 2" x 4-1/2"
DC-1395 DANGER - Rotating Flight 4-1/4" x 6-1/4"
DC-1901 WARNING - No Step 2-1/2" x 5"
If the safety sign cannot be easily read for any reason or has been painted over,
replace it immediately. Additional Safety Signs may be obtained free of charge
from your dealer, distributor, or ordered from the factory.