Grain Systems Unload Augers PNEG-1556 - Manual (Page 25)

3. Installation
PNEG-1556 8", 10" and 12" Commercial Vertical Drive Unit - Dual Drive 25
Installing the Motor (Continued)
Figure 3Q
Installing the Belts
A. Place the belts onto the pulleys.
B. Screw the lower motor mount adjustment nut upward, raising the motor mount plate and putting
tension on the belts.
C. Once the desired tension is reached, tighten the upper motor mount adjustment nut down onto the
motor mount plate, thereby locking it into place.