Grain Systems PNEG-1717 - Manual (Page 5)

PNEG-1717 CE Approved GSI/FFI Portable Dryer Manual 5
1. Introduction
Dryer Operation
Thank you for choosing a CE Approved GSI/FFI Vision Series Grain Dryers.
Please read this manual before installing or operating the equipment.
Make sure you and your employees understand all requirements, hazards and precautions associated
with this equipment. Failure to do so could result in SERIOUS INJURY or DEATH.
Ensure you have the correct power and fuel supply for the dryer.
Do not alter or modify this equipment.
Follow all local directives, codes and regulations when installing this equipment.
Authorities having jurisdiction should be consulted before installations are made.
Precautions
1. Keep ALL guards, safety decals and safety devices in place. NEVER operate with guards removed.
2. Restrict access to trained persons only.
3. NEVER bypass safety devices.
4. Switch OFF and LOCK all power and fuel before entering, servicing or accessing the equipment.
5. Follow all servicing instructions.
6. Keep the dryer CLEAN.
7. DO NOT exceed maximum temperatures or pressures.
8. Drying unclean grain will reduce the performance of the dryer and can cause fires.
9. CAUTION Equipment on the dryer can START AUTOMATICALLY.
10. Feed and discharge equipment must match dryer throughput.
11. DO NOT allow foreign material to be drawn into the fan.
12. When drying products not included in this manual refer to GSI for further precautions and instructions.
13. Check for leaks at least every day. Repair before operation.
Use Caution in the Operation of this Equipment
This dryer is designed and manufactured with operator safety in mind. However, residual hazards remain
due to the nature of grain drying. Use extreme caution at all times.
Keep the dryer clean.