Grain Systems PNEG-1717 - Manual (Page 8)

8 PNEG-1717 CE Approved GSI/FFI Portable Dryer Manual
3. Installation
Transporting/Single Fan
When transporting the unit by truck or tractor observe these precautions:
1. Hitch height is 350 mm-430 mm. (See Figure 3A.)
Figure 3A
2. Hitch pin diameter is 19 mm minimum. Must be securely fastened. (See Figure 3B.)
3. Minimize hitch movement. (See Figure 3B.)
Figure 3B
4. Use a safety chain. (See Figure 3A.)
5. Dryer must be empty and towed in accordance with all applicable laws and regulations.
6. Tyre pressure should be 3.8 bar.
7. Maximum towing speed is lowest of 70 km/h or statutory speed limit.
8. After first 80 km and every 300 km check:
a. Wheel bearing temperature <= 65°C.
b. Wheel nuts torque = 160 Nm.
Washers
Locking nut
19 mm Minimum diameter