Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 14)

PNEG-739 42" - 48" Platforms & Safety Cages 14
42'' Head Service Platform
1
Attach support channel, HSP42042, to underside
of floor panels at the hatch opening (Figure 1-4).
Small floor panels may be left off until the outside
toeboards are attached. Use the 5/16" x 1" hex
bolts during this assembly. Attach toeboards to
the ends of the deck panels and to the support
channels as shown in (Figure 1-4). Be sure and
use splice channel on side toe boards. Tighten
all hardware.
Outside Toeboards
FIGURE 1-4
Z Toeboard - 42"
Z Toeboard - 54"
Platform Support
Channel - 40"
Toeboard Channel - 120"
Toeboard Splice Plate
Toeboard Channel 46.976"
Z Toeboard 120"
FIGURE 1-4