Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 30)

PNEG-739 42" - 48" Platforms & Safety Cages 30
Distributor Platform Assembly
3
With clamps fastened securely to the trunk, attach
the platform support channels to the middle
clamp, use ½" hardware with this assembly. The
platform brace channels will attach in the upper
set of holes on side of support channel and to
the lower clamp. Before tightening hardware, the
support channels must be perpendicular to the
trunk, now tighten all hardware. (See Figure 3-2)
FIGURE 3-2
Distributor Platform
Support and Brace
Channels
FIGURE 3-2
Platform Support Channel (2)
Platform Brace Channel (2)