Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 39)

PNEG-739 42" - 48" Platforms & Safety Cages 39
Safety Cage Assembly
4
FIGURE 4-4
Ladder Attachment
Attach the ladder to the standoffs using 1/2"-13 x
1" hex bolts. When attaching the ladder to the
standoffs, the ladder is attached through the sec-
ond hole down the front end of the ladder. The
first hole is for the safety cage hoop. Attach the
safety hoop to the ladder using 1/2" x 1"hex bolts.
(See Figure 4-4)
1/2"-13 x 1"
Hex Bolt
1/2"-13 Hex Nut
10' Ladder
Section** (10foot)
27" Safety Cage
Hoop (27Hoop)
**NOTE: A ten foot section is used at
anytime the ladder continues on to
another section of ladder. A fourteen
foot section is used anytime the ladder
extends through any platform deck.