Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 42)

PNEG-739 42" - 48" Platforms & Safety Cages 42
Safety Cage Assembly
4
FIGURE 4-6
Safety Cage Flare
Attachment
1/2"-13 x 1" Hex Bolt
1/2"-13
Hex Nut
Safety Cage Tapper
Vertical Bar (taper-v)
30" Safety
Cage Hoop
(30hoop)
27" Safety Cage
Hoop (27hoop)
Attach the safety cage tapper vertical bars to the
inside of the 27" & 30 " safety hoops using 1/2" x
1" hex bolts. (See Figure 4-6) Then fasten the
27" safety cage hoop through the top hole on the
ladder using 1/2" x 1" hex bolts. Install the 30"
Hoop to the ladder using 1/2" x 1" hex bolts.